Product Info Page
Our stools and tables are made from commercial grade materials and designed to handle whatever abuse you or your patrons can throw at them ! Here are some important items to know about our products:
- The graphics/pictures are printed on special translucent material that allows for great viewing whether the stool is lighted or not.
- The graphics are protected by a flexed sheet of Lexan. This is the same material used in bullet-proof windows. It will not crack or break.
- The stools are designed to flex under your weight. This is a huge benefit if your floor is not perfectly level. The stool will level itself.
- The light kits for both the stools and the tables are powered with a 12 volt rechargeable battery. The battery will last for at least 50 hours on one charge.
- The battery powers a LED light bulb. One bulb should last several years.
- Recharging is simple. Simply plug the smart charger into the bottom of the stool or the underside of the table top. A full charge takes roughly 2 1/2 hours. Charging time can be much less if the stools and tables are re-charged on a regular maintenace schedule.
Changing prints in the stool is simple and convenient
- Simply remove the seat cushion, held in by two pin-clips.
- Slide out the old print.
- Slide in the new print.
- Replace the seat and pins.
- Start generating revenue off of the new promotion
It is that easy !
Changing prints in the table is even easier
- Simply pop out the Lexan and print.
- Line up the new print with Lexan.
- Slide the vertical edge of the Lexan panel, with the new print behind it, into one side of the Lexan panel brackets welded to the table legs.
- Flex and bow the Lexan panel outward and tuck the opposite edge under the bracket on the next leg to snap the panel and new graphic into place.
Again, its that easy !
Call or email to discuss the possibilities for your own, personalized design.
(217) 553.0796
info@sundrydesignsolutions.com